Page 44 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
channels. Level can be controlled through sliders with a dB display and also be
muted directly with a checkbox.
These settings can be saved in a preset using the Preset Control toolbar. To save all
settings for the default state after a system boot, go to File menu->System->Save
Default Preset.
Peak LED:
The peak LEDs give basic feedback of the current input level. If no or very low input
signal is present, the led turns grey, if input is ok it turns green and by clipping it, it
turns red. This way you can verify if you have connected the right input or if the
internal HD playback works.
Input select:
If you have the HD option installed, you can select the input method of each
channel. The input channels can be used either with the internal playback engine
with the Coolux Media Manager or as live input from the physical input of the wave
Processor. To change the input, simply mark the player live from the selection box.
Distance Attenuation:
The distance attenuation button above each fader enables the level drop function.
When distance attenuation is selected the level of the sound source drops with
increasing distance of the source from the listening area and enables realistic
perception of the distance of the sound source.
Figure 1.33
