Page 11 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Hardware Revisions
The pictures, Figure 1.4 and 1.5, show the back plate of the Hardware Revision 1
“Pluto”.
The Hardware Revision 2 “Neptun” of the Sonic Wave I processor comes with two
Ethernet ports. For communication with a control PC the left connector on the
back must be used. See Figure 1.6 below.
System Dongle
The Sonic Wave I processor comes with a system dongle in which all system
specific preferences are stored. The dongle is configured by Sonic Emotion™.
The dongle is processor dependent and only works with the specific Sonic Wave I
processor it is intended for.
It must - at any time - be plugged in in one of the USB port of the Sonic Wave I
processor.
Ethernet
Figure 1.6
