SOMNOmedics SOMNOwatch plus, Instruction Manual

Page: 130 / 162

-130-
(3) None or All will remove either all analysis channels or none of them.
(4)
Add Anaylsis Channel will add a selected analysis channel to the raw data window.
(5) Set marker will open the Markers window (see chapter 7.4.4).
(6) Set Info-marker allows you to add markers with several text lines (free text comments).
(7) Define Start and Define End will set predefined markers and the data before and after this
markers will be hidden from view. This function can be reserved by deleting the markers Start
and End (see chapter 7.4.4).
(8) Define Lights Off and Define Lights On will set the corresponding markers and define the
Time in Bed for the report. The Lights Off marker is also used for the calculation of the Sleep
Latency .
(9)
Sleep on set, End Sleep and Sleep on set are only selectable in recordings with activated
Sleep Profile Analysis. The functions are described more detailed in chapter 6.5.2.8 at
Advanced Sleep Edit Mode.
(10)
FFT Module will illustrate graphically the frequency rate of the marked area.
(11) Averaging will calculate an average curve of several signal spans.
(12) Play will scroll though the Raw Data in different speed levels.
(13) Print raw data will print the current Raw Data display window.
Mark a section in the Raw Data Window by holding the left mouse button pressed and right-click
on this section to get the following functions:
(14) Zoom Selection will display the marked area over the complete Raw Data window.
(15) Save Sample will save the marked area for addition to the reports (see chapter 7.4.5).
(16) Define are
a as …
offers the possibility to define the marked period e.g. as jogging. The
detected events within these defined areas will be shown in the report.