SOMNOmedics SOMNOwatch plus, Instruction Manual

Page: 113 / 162

-113-
7.3.7 Menu - Raw Data Profiles
In the
Raw Data Profiles, the display window can be configured to your own requirements. A Raw
Data Profile is the collection of channels which are predefined for a specific recording.
Please note:
- You can set different time bases (display) for each profile (see red box in fig. 7-31)
- It is possible to change, delete or rename existing profiles.
-
The Raw Data Profiles can be opened from the pop-up menu in the Raw Data Window
during Analysis or On-line Acquisition (see chapter 7.4.2.2).
- You can change the order of the profile channels with Drag and Drop.
fig. 7-31: Menu - Raw Data Profiles
The button
Save as …
Saves the Profile with a New Name. It provides a quick and easy method to
save a slightly modified version of an existing Profile as a new Profile.
For the Dual Time Base (two raw data templates are represented at the same time with a horizontal
splitting line), two raw data profiles can be selected which should normally be shown in the higher or
lower part (see green mark in fig. 7-31).
Creating a new profile:
Click the button New Profile and enter a
name. After clicking OK , all channels will
be activated. Unmark the channels which
are not relevant for your current profile.
If you wish to rename a profile, please click
on the button
Rename Profile.
Defining a Default Profile:
In the left hand box, select an existing
profile; it will be highlighted in blue. Then
click on the button
Define as Default
Profile .
When a recording is opened, the Raw
Data signals will be displayed according to
the selected Default Profile.
Here you can set the time
base (from 2s to 6002s),
over which the profile
should be displayed.