Copyright © 2014 SOMFY ACTIVITES SA. All rights reserved.
2
EN
RDO 50 CSI / RDO 60 CSI
> Cable feed
If the motor is to be used outdoors, the PVC power supply
cable [VVF, 60227 (IEC)] must be installed in a duct (under
a tray).
1.4 Safety instructions relating to installation
WARNING
Before installing the motorisation, remove any unnecessary
cords or chains and deactivate any locking device (bolt)
which is not required for motorised operation.
DANGER
A fall protection device must be installed to ensure personal
safety and prevent damage to equipment if one of the
connection components between the transmission and
the door shaft accidentally ruptures. Use a fall protection
device referenced in the documentation available from
your Somfy adviser.
WARNING
Modifying one of the elements provided in this kit or using
an additional element not recommended in this manual is
strictly prohibited.
Do not use adhesive to secure the motorisation.
Install the operating element less than 1.80 m from the
ground.
As the mobile component of the repair device is removable,
it is recommended to store it in the immediate vicinity of the
door.
Fasten the label concerning crushing and the manual
override mechanism close to the operating element in a
KLJKO\YLVLEOHORFDWLRQRUFORVHWRDQ\¿[HGFRQWUROGHYLFHV
After installation, check that the manual override mechanism
works correctly.
> Clothing precautions
Take off any jewellery (bracelet, chain, etc.) during
installation.
For manoeuvring, drilling and welding operations, wear
appropriate protection (special glasses, gloves, ear
protection, etc.).
1.5 Safety instructions relating to use
See the safety instructions for the receiver for the roller
garage door.
1.6 Regulations
Somfy declares that the product described in these
instructions, when used in accordance with these
instructions, complies with the essential requirements of
the applicable European directives and, in particular, with
Machinery Directive 2006/42/EC.
The full text of the EC declaration of conformity is available
RQ WKH IROORZLQJ ZHEVLWH ZZZVRPI\FRPFH $QWRLQH
CREZE, Head of Regulations, Cluses
2 - FIELD OF APPLICATION
The RDO CSI motor is designed to be paired with a Somfy receiver for roller
garage doors for residential use, opening and closing vertically.
3 - INSTALLATION
3.1 Preparing the tube - Fig.1
3.2 Assembling the motor - Fig. 2
3.3 Installing the tube on its brackets - Fig.3
3.4 Manual operation - Fig.4
(only in the event of a mains power cut)
4 - POWER SUPPLY AND WIRING
-
5HFHLYHUVHHUHFHLYHULQVWUXFWLRQVIRUWKHPRWRUZLULQJ
5 - SETTING THE END LIMITS
5.1 Setting the upper end limit - Fig. 5
5.2 Setting the lower end limit - Fig. 6
6 - TROUBLESHOOTING
6.1 The motor does not work
&KHFN
- the motor wiring
- the thermal contact (wait for the motor to cool down)
- the conformity of the cable used (4 conductors)
6.2 The device stops too early
&KHFN
- the operation of the end limits while the motor is rotating
-
WKDWWKHGULYHVSURFNHWLV¿UPO\DWWDFKHGWRWKHWXEH
-
WKDWWKHPRWRUHQGOLPLWVDUHFRUUHFWO\FRQ¿JXUHG
7 - TECHNICAL DATA - FIG. 7
