3
uSE ANd OPErATION
default operation in sequential mode
By default, the gate will operate in sequential mode.
Operation in "complete opening" mode with a 2- or 4-button remote control (fig. 1)
Press the programmed button to open the gate fully.
Obstacle detection operation
When an obstacle is detected during opening, the gate will stop. Pressing the programmed button on the remote control closes the gate.
If an obstacle is detected during closing, the gate will stop. Pressing the programmed button on the remote control reopens the gate.
Operation in automatic closing mode
If the automatic closing mode has been programmed during installation, the gate will operate as follows.
Pressing a programmed button on the remote control will cause the gate to open. The gate will close automatically after 30 seconds. If photoelectric cells
are installed, any movement in front of the cells will cause the gate to close automatically after 5 seconds.
The gate can be held in the opened position by giving a stop command during the time delay. To close the gate, press the remote control button again.
1
STOP
STOP
2
Operation in "pedestrian opening" mode with a 2- or 4-button remote control (fig. 2)
Press the programmed button to open the gate in pedestrian mode.
Operation in "complete opening" mode with a 3-button remote control (fig. 3)
3
STOP
4
Operation in "pedestrian opening" mode with a 3-button remote control (fig. 4)
Summary of Contents for HOME MOTION Axovia 220B
Page 1: ...EN Installation instructions Axovia 220B...
Page 25: ...5...