8
[7].
Permanently fix the gate leaf bracket using the central
mounting hole.
INSTAllING ThE INTEGrATEd OPENING ENd STOP
[1].
Manually open the gate to the opened position
α
required.
[3].
Close the gate slightly.
[4].
Move the end stop approximately 2 mm towards the motor
arm shoulder.
[5].
Tighten the end stop with a long Allen key for greater torque
when tightening the end stop bolts (16 Nm).
[6].
Install the end stop covers: screw the lower cover (with holes)
(22b), holding the shaft while performing this operation, then
screw in the upper cover (22a).
α
max
2mm
[2].
Install the end stop on the bracket side, flush against the
shoulder of the motor arm.
Do not tighten the stop.
A
B
C
d
E
f
22a
22b
2
1
Summary of Contents for HOME MOTION Axovia 220B
Page 1: ...EN Installation instructions Axovia 220B...
Page 25: ...5...