4.5. Fastening the arms to the gate leaves
4.5.1. Installing in a zone with little or no wind
Placing the arm in the closing position
1)
Place the gate in the closed position: the gate leaves must press
against the central closing stop.
2)
Unfold the arm towards the gate, aligning the motor arm marking with
the gate arm marking, ensuring a distance of 15 cm between the fas-
tening sha of the arms and the fold of the arms.
This arm adjustment ensures installation in accordance with standard
EN 12453 - appendix A without any additional adjustment for gate leaves
with a length of 1 to 2.5 m, a weight of up to 150 kg and a 3S Axovia Control
Box.
Arm alignment to be
respected
4.5.2. Installing in a windy zone
Placing the arm in the closing position
1)
Place the gate in the closed position: the gate leaves must press
against the central closing stop.
2)
Unfold the arm towards the gate, positioning the two semi-arms as
shown in the diagram below.
Position of the Axovia MultiPro on the pillar in a windy zone
• Dimension B between 200 mm and 350 mm
The position of the motorisation on the pillar is crucial to ensure that the
installation works correctly.
In a windy zone, it is necessary to ensure that dimension B is as large as
possible (max. 350 mm).
200 mm < B < 350 mm
65
• Dimension B < 200 mm
Attention
If dimension B is small, it is possible to offset the arm’s axis of
rotation using the bracket for narrow pillars, ref. 9014360.
B < 200 mm
7
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.
EN
Axovia Multipro
