1. SAFETY INSTRUCTIONS
DANGER
The drive must be installed and adjusted by a professional
drive and home automation installer, in compliance with
the regulations of the country in which it is to be used.
Failure to follow these instructions could result in serious
injury, e.g. crushing by the gate.
1.1. Caution - Important safety instructions
WARNING
For reasons of personal safety, it is important to follow
all the instructions, as incorrect installation can lead to
serious injury. Retain these instructions.
The installer must train all users to ensure the drive is
used in complete safety, in accordance with the operating
guide.
The user manual and installation manual must be given
to the end user. The installer must explain clearly to the
end user that installation, adjustment and maintenance
of the drive must be performed by a professional motor-
isation and home automation installer.
1
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.
EN
Axovia Multipro
TRANSLATED VERSION OF THE GUIDE
CONTENTS
GENERAL INFORMATION
Safety instructions
Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.
1. Safety
instructions
1
1.1. Caution - Important safety instructions
1
1.2. Introduction
2
1.3. Preliminary checks
2
1.4. Risk prevention
2
1.5. Electrical installation
3
1.6. Safety instructions relating to installation
3
1.7. Regulations
3
1.8. Assistance
3
2. Product
description
4
2.1. Field of application
4
2.2. Overall size of motor (in mm)
4
2.3. General view of a standard installation
4
3. Pre-installation
checks
4
3.1. Necessary clearance
4
3.2. Pillar strengthening bracket
4
3.3. Gate leaf reinforcement
4
3.4. Electric lock
4
4. Installing the standard kit
5
4.1. Assembling the motor
5
4.2. Unlocking the motor
6
4.3. Assembling the arms
6
4.4. Assembling the arms on the motor
6
4.5. Fastening the arms to the gate leaves
7
4.6. Wiring the motors
9
5. Commissioning
9
6. Installing special arms
9
6.1. Jointed arm for opening outwards
9
6.2. Ball-joint arm for opening on a slope of up to 20%
10
6.3. Runner arm for opening up to 150° or reduce side room
11
6.4. Special gate or pillar dimensions / opening up to 120°
12