Solwise 3G11nMRW User Manual Download Page 90

Page: 90 / 257

Version 1.0.15

Click on “

Delete Selected

” to erase the selected MAC address. Click on “

Delete All

” to erase

all the entered MAC Address.

5.2.5

WDS Settings

WDS

(Wireless Distribution System) is a Wireless Access Point mode that enables wireless

bridging in which only WDS APs communicate with each other (without allowing for wireless

clients or stations to access them), and/or wireless repeating in which APs communicate both

with each other and with wireless stations (at the expense of half the throughput) .

Internet

AP Router

WDS

AP Router

WDS

Wireless Connection

Wired Connection

Please follow the instructions to setup WDS connections.

Step 1.

Check the MAC address and Channel number of the device you want to setup

WDS with 3.5G plus 11n Mobile Server Router .

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 90 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: