Solwise 3G11nMRW User Manual Download Page 14

Page: 14 / 257

Version 1.0.15

1.4

System Requirements

To begin with 3.5G plus 11n Mobile Server Router, you must have the following minimum

system requirements. If your system can’t correspond to the following requirements, you

might get some unknown troubles on your system.

XDSL/Cable Modem and broadband Internet Account.

One Ethernet (10 BASE-T or 10/100 BASE-TX) network interface card.

CP/IP and at least one web browser software installed (E.g.: Internet Explorer 5.0,

Netscape Navigator 7.x, Apple Safari 2.03 or higher version).

At lease one 802.11g (54Mbps) or one 802.11b (11Mbps) wireless adapter for wireless

mobile clients.

Recommended OS: Win2000 or WinXP / Linux.

1.5

Get Your IP Automatically & Manually

After 3.5G plus 11n Mobile Server Router connected with your computer, please make sure

your IP is in the automatic IP position or you adjust it manually in order to activate the Internet

network from home to Internet. If you don’t know how to enter the settings, please follow the

steps as below.

Step 1.

Go to

Start

Settings

Network Connections

and then select

Local Area

Connection

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 14 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: