Solwise 3G11nMRW User Manual Download Page 246

Page: 246 / 257

Version 1.0.15

246

9.3

IP Address

Q: What is the default IP address of the router for LAN port?

A: The default IP address is 192.168.1.1 with subnet mask 255.255.255.0

Q: I don't know my WAN IP.

A: There are two ways to know.

Way 1:

Check with your Internet Service Provider.

Way 2:

Check the setting screen of 3.5G plus 11n Mobile Server Router. Click on

Status & Log

item to select

Network Configuration

on the Main Menu.

WAN IP is shown on the WAN interface.

How can I check whether I have static WAN IP Address?

A: Consult your ISP to confirm the information, or check Network Configuration in 3.5G

plus 11n Mobile Server Router’s Main Menu.

Will the Router allow me to use my own p ublic IPs and Domain, or do I have to use

the IPs provided by the Router?

A: Yes, the Router mode allows for customization of your public IPs and Domain.

9.4

OS Setting

Why can’t my computer work online after connecting to 3.5G plus 11n Mobile

Server Router?

A: It’s possible that your Internet protocol (TCP/IP) was set to use the following IP

address. Please do as the following steps. (Windows 2000 & XP)

Start

＞

Settings

＞

Network and Dial-up Connections

＞

double click on

Internet Protocol(TCP/IP)

＞

select

obtain IP address automatically

＞

Click on

button. Then, open Internet

browser for testing. If you still can’t go online, please test something else below.



Verify network configuration by ensuring that there are no duplicate IP

addresses.



Power down the device in question and ping the assigned IP address of the

device. Ensure no other device responds to that address.



Check that the cables and connectors or use anoth er LAN cable.

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 246 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: