Solwise 3G11nMRW User Manual Download Page 255

Page: 255 / 257

Version 1.0.15

255

A: Your printer’s driver is lost or incompatible with your router. Please set up the

printer’s driver again. If you don’t hav e the appropriate driver or want to get a

compatible one, please contact with your printer supplier.

9.11 Support

Q: Why can’t the NTFS hard disk be used with 3.5G plus 11n Mobile Server

Router?

A: 3.5G plus 11n Mobile Server Router doesn’t support the NTFS h ard disk. It only

supports EXT3 and FAT32 file systems.

Q: Why can’t my USB devices work on 3.5G plus 11n Mobile Server Router?

A: Maybe your USB devices and 3.5G plus 11n Mobile Server Router are not compatible.

So if you want to know whether your inserte d device such as USB Web Camera,

USB Printer or USB HDD corresponds with 3.5G plus 11n Mobile Server Router,

please check with your product supplier.

Q: What is the maximum number of IP addresses that the XDSL Router will

support?

A: The Router will support to 253 IP addresses with NAT mode.

5. Q: Is the Router cross -platform compatible?

A: Any platform that supports Ethernet and TCP/IP is compatible with the Router.

9.12 Others

Q: Why can’t I receive corrupted FTP downloads?

A: If you are experiencing corrupte d files when you download a file with your FTP client,

try using another FTP program.

Q: Why does the router dial out for PPPoE mode very often?

A: Normally some of game, music or anti -virus program will send out packets that

trigger the router to dial ou t, you can close these programs. Or you can set the idle

time to 0, then control to dial out manually.

Q: What can I do if there is already a DHCP server in LAN?

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 255 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: