Solwise 3G11nMRW User Manual Download Page 24

Page: 24 / 257

Version 1.0.15

Time Zone Select:

Select your time zone from the Time Zone drop -down list.

Change Password:

For changing password, please fill the password information i nto

the blank.

Device Name:

Name your device here. The default is

Mini_3G_SNR

Note: System will automatically copy the last 6 numbers of this device’s MAC address after your device name .

WAN Interface Setup:

Select the WAN Interface from the drop -down list.

WAN Type Setup:

Please choose the access type.

Wireless Setup:

Fill in the ESSID if it is blank , and your prefer Encryption type. The

default is

ESSID_Mobile_Router.

Partition / Format SysDisk :

To partition/format your USB disk, please select Yes and

the type.

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 24 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: