Solwise 3G11nMRW User Manual Download Page 55

Page: 55 / 257

Version 1.0.15

4.6.5

Webcam Server

If you plan to use 3.5G plus 11n Mobile Server Router as a Web Camera site, connect a

supported USB Web Camera to the USB port of 3.5G plus 11n Mobile Server Router.

Please click on “

Next

” to next setup.

4.6.6

Samba Server

3.5G plus 11n Mobile Server Router supports NetBIOS protocol, providing network neighbors

to share file folders or printer.

Please click on “

Finished

” to complete settings.

4.7

WiFi AP Mode

As WiFi AP Mode, 3.5G plus 11n Mobile Server Router will be a bridge and support a wireless

LAN. NAT function is disabled under WiFi AP mode. The 3.5G plus 11n Mobile Server Router

connects the upper level device wirelessly and gets its assigned IP address. If not, the 3.5G

plus 11n Mobile Server Router will use the default IP or assigned by the user.

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 55 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: