
Version 1.0.15
252
A: The Wireless Router processes the data passing through it, so it is not transparent.
Use the Special Application feature to allow the use of Internet applications which do
not function correctly. If this does solve the problem, you can use the DMZ function.
This should work with almost every application, but:
It is a security risk, since the firewall is disabled.
Only one (1) PC can use this feature.
5.
Q: I can’t connect to the Wireless Rou ter to configure it.
A: Check the following:
The Wireless Router is properly installed, LAN connections are OK, and it is
powered ON.
Make sure that your PC and the Wireless Router are on the same network
segment.
If your PC is set to “Obtain an IP Address automatically” (DHCP client), restart it.
If your PC uses a Fixed (Static) IP address, make sure that it is using an IP
Address within the range 192.168.1.129 to 192.168.1.253 and thus compatible
with the Wireless Router’s default IP Address of 192.168.1 .254. Also, the
Network Mask should be set to 255.255.255.0 to match the Wireless Router. In
Windows, you can check these settings by using Control Panel ~ Network to
check the Properties for the TCP/IP protocol.
6.
Q: The WinXP wireless interface couldn’t c ommunicate the WEP with 3.5G plus
11n Mobile Server Router’s wireless interface.
A: The default WEP of WinXP is
Authentication Open System - WEP
, but the WEP of
3.5G plus 11n Mobile Server Router is only for
Shared Key - WEP
, it caused both
sides couldn’t communicate. Please select the WEP of WinXP from Authentication
Open System to
Pre-shared Key - WEP
, and then the WEP wireless interface
between WinXP and 3.5G plus 11n Mobile Server Router would be communicated.
9.7
Samba Server
1.
Q:
Why can’t I access the Sam ba Folder via my network places while connecting
to 3.5G plus 11n Mobile Server Router?
A: First, you should check if you have connected assigned storage device properly.
Then enable Samba Server afterwards, so that it can be accessed.
Summary of Contents for 3G11nMRW
