Solwise 3G11nMRW User Manual Download Page 38

Page: 38 / 257

Version 1.0.15

Click on

Next

button to go on next setting page.

4.2.3.6

WAN Access Type – PPPoE

This option is typically used for DSL services. Choose PPPoE (Point to Point Protocol over

Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and

password.

Apply 3G or 3.5G transmission rate for the backup. In other words, once PPPoE connection

is disconnected, the system automatically connects Internet via 3.5G adapter. If 3.5G signal

is not available, it starts to search downward for 3/2.75/2.5G signals until none existed.

Setting up the interval time to auto detect whether the Internet connection is lost or not. If yes,

the system immediately switches to 3.5G Internet connection and will not switch back to the

original PPPoE connection.

Summary of Contents for 3G11nMRW


































































































































































































































































Search results

Summary of Contents for 3G11nMRW

Reviews:

Solwise 3G11nMRW, User Manual, Page: 38 / 257

Search results

Summary of Contents for 3G11nMRW

Reviews: