CSE-M53G User Manual Ver. 1.0
Sollae Systems Co., Ltd.
- 38 -
5.4
UDP
UDP has no connection processes. In this mode, data is sent in block units.
Therefore, data that comes through CSE-M53G
’s serial port
is collected in block
units to send it elsewhere.
5.4.1
Key parameters
⚫
Block Size(Byte)
[Block Size(Byte)] is to set the time to gather data in one block. Its unit is
byte. If the data in configured size of the [Block Size(Byte)] comes into the
serial port, CSE-M53G will send them as one block to the network. The maximum
value could be 1460 bytes.
⚫
Dynamic update of Peer host
If you set the value of [Peer Address] and [Peer Port] to 0, [dynamic update
of peer host] function is activated. By using this function, CSE-M53G can
communicate to multiple hosts without additional setting.
