Sollae Systems CSE-M53G User Manual Download Page 57

Page: 57 / 68

CSE-M53G User Manual Ver. 1.0

Sollae Systems Co., Ltd.

- 56 -

https://www.ezTCP.com

8.3.3

TELNET COM port Control Option (RFC 2217) -

③

This option is for sending and receiving serial port states between two devices.

Users can send and receive control signals like RTS/CTS when the states are changed.



Refer to the [Telnet COM Port Control Option] document on our website for

details.

8.3.4

TCP Server / Client mode -

④

This mode is available on TCP client mode only. In this mode, you do not need to

change the mode for switching active or passive TCP connection. Note that the [Event

Byte] option should be set to more than 1.



Refer to the [TCP Server / Client mode] document on our website for details.



CSE-M53G

’

s Data Frame interval is configured 2byte data interval. Before

sending data from the serial port to LAN, CSE-M53G gathers data in the buffer.

If there is no data during the time configured in the 2byte data interval, it

will send data to the network.

Summary of Contents for CSE-M53G





































































Search results

Summary of Contents for CSE-M53G

Reviews:

Related manuals for CSE-M53G

Brands by name

Popular brands

Sollae Systems CSE-M53G, User Manual

Search results

Summary of Contents for CSE-M53G

Reviews:

Related manuals for CSE-M53G

Brands by name

Popular brands