CSE-M53G User Manual Ver. 1.0
Sollae Systems Co., Ltd.
- 40 -
⚫
Dynamic Update of Peer host
This is a function that CSE-M53G automatically sets its peer host with
information of the last packet received from network. The source address of
the packet is set to the peer host.
Parameters
Values
Peer Address
0 (None)
Peer Port
0
Table 5-15 setting for [dynamic update of peer host] function
Figure 5-11 time chart for [dynamic update of peer host]
Points
States
~
Remote host 2 sends data to CSE-M53G
①
CSE-M53G sets host 2 to peer host
~
Remote host 1 sends data to CSE-M53G
②
CSE-M53G updates host 1 to peer host
~
Remote host 2 sends data again to CSE-M53G
③
CSE-M53G updates host 2 to peer host
~
CSE-M53G can communicate with remote host 2
Table 5-16 states of each point
The data
“
ABC
”
,
“
DE
”
,
“
FGH
”
are from the serial port of CSE-M53G in the above
figure.
