CSE-M53G User Manual Ver. 1.0
Sollae Systems Co., Ltd.
- 22 -
3.2
AT command
In the AT command mode, you can change some parameters through the serial port.
⚫
Checklists
Make sure the connection between your PC and CSE-M53G using RS232 cross cable.
To use this, CSE-M53G has to be set to [AT command] mode as its communication
mode. This can be configured by ezManager.
Figure 3-5 setting the communication mode to the AT command
⚫
Procedures
Figure 3-6 procedures for configuration with AT command
Division
Available parameters
IP Address related items
Local IP Address, DHCP, PPPoE, Subnet Mask, Gateway
IP Address, DNS IP Address,
···
TCP connection related
items
Local Port, Peer Address (IP Address or Host name),
Peer Port,
···
Option
ESC code sending option, timeout,
···
Table 3-1 parameters which are available to change with AT command
Including above items, rest of parameters can be set by ezManager
