CSE-M53G User Manual Ver. 1.0
Sollae Systems Co., Ltd.
- 21 -
3.1.2
Configuration via Serial
⚫
Checklists
Make sure the connection between your PC and CSE-M53G using RS232 cross cable.
To use this, CSE-M53G has to be operating in the [Serial Configuration] mode.
By connecting ISP- pin with GND (LOW) less than 1 second, you can enter the
mode. After this, read the setting via [Serial] tab on ezManager.
⚫
Procedures
Figure 3-3 procedures for configuration via Serial
⚫
Step 2, Reading
Figure 3-4 reading procedure via serial
①
Choose the [Serial] tab.
②
Select the COM port which the CSE-M53G is connected with.
③
Open the COM port with the [Open] button.
④
Load the setting by pressing [Read] button.
