Page 18
SOLIDYNE 562
dsp - broadcast digital processor
3.2.3 PROCESSOR SETUP
MIC PROCESSING PGM:
MICstart input allows to
change the processing program when the operator
activates the microphones at the console, applying
a specific processing to obtain high impact voices.
This is a very useful feature, since it’s not possible
to obtain an adjustment that sounds optimal for
music and voice simultaneously; for being two
audio signals morphologically different. The attack
and recovery times of the AGC differ sensibly for
both cases; and must be carefully fit to avoid that
its action is audible.
This option is
disabled from factory
(program
30:Mic processing off). In order to enable it, select
“Mic processing PGM” and choose a program
created for voices (for example 09:VOICE
IMPACT).
The commutation controls from a connector in the
rear panel, detailed in the installation chapter (see
“2,5 Console MIC Start”).
TIPS
The
programs for “music” and “voice” do not have to be
radically different
. The gains of the density EQ and the
AGC output must stay without greater variations. The
differences will be fundamentally in the attack and recovery
times of the AGC and the multiband compressor.
It agrees to create the adjustment for voices starting from
the adjustment chosen for music. The attack and recovery
times used for music usually are slower than those required
for the voices, mainly in the AGC. Observe and compare the
factory presets.
PASSWORD:
You can define a password to avoid
the access of unauthorized personnel to the main
menu to change the settings. Once defined,
562dsp will ask for the password whenever you try
to accede to the main menu, but you don’t need
the password to explore the program list and
change the program on-air.
The password must have 3 characters. Any
combination of letters, numbers and symbols can
be used.
•
To enter a password, go to field “Password” turning
the JOG and touch it briefly to confirm.
•
A flashing cursor appears to enter the first character.
Turn the JOG until reach the wanted symbol and
confirm with brief touch. The cursor will jump to the
next character.
•
Proceed in the same way to choose the others
characters.
•
After confirm the last character, the option “OK” is
on focus. PRESS AND HOLD to confirm the
password. A brief touch in this point will make jump
the cursor to the first character again.
•
Press and hold the JOG cancels the process
in
any instance (equivalent to escape),
except when
“OK” is selected
, in such case confirm the
password!
•
To
delete the password
, edit it entering 3 space
characters.
Write down the password in a secure place, in
order to do not loose it. If you forgot the
password, please contact with you Solidyne
dealer.
PROCESSOR MODE:
Shows the processor type.
The unit can be prepared for FM or AM stations.
This is defined in factory, because requires some
internal changes in the circuit board; as well as a
different programming of the flash memory with
the corresponding constants for the AM band.
Summary of Contents for 562dsp
Page 2: ...P gina 2 procesador para radiodifusi n SOLIDYNE 562dsp...
Page 28: ...28 SOLIDYNE ORION 462 MKII THIS PAGE INTENTIONALLY LEFT BLANK...
Page 30: ...Page 30 SOLIDYNE 562dsp broadcast digital processor THIS PAGE INTENTIONALLY LEFT BLANK...
Page 38: ...Page 38 SOLIDYNE 562dsp broadcast digital processor THIS PAGE INTENTIONALLY LEFT BLANK...
