Solidyne 562dsp, User Manual

Page: 14 / 44

Page 14 FM broadcast digital processor - SOLIDYNE 562 dsp EVOLUTION
•
Verificar que el protocolo de transporte sea
TCP.
• Que la opcion 'On-the-fly commands' este
habilitada
(modo normal = Out of band)
.
•
Connection mode=
Inmediatly
.
VirtualRack software automatically explores the
first 5 ports to detect de 562dsp/IP hardware.
If the port number assigned was
bigger than Port
5
; then
you must declare the port manually
by
editing the configuration file serial.ini (VirtualRack
folder).
2.8.3 Accessing from Internet
If you want access to a 562dsp/IP located outside
your LAN; there are two possible ways in which
the device can be connected to the network.
The unit is connected directly to Internet:
In
this case you must enter the IP address assigned
by the Internet provider (ISP).
The unit is connected in another LAN
(with
shared Internet access): In order to accede from
an remote PC to the LAN you must configure the
router of that LAN to redirect the packages
incoming by port 1101 to local IP address
assigned
to 562dsp/IP (in our example
192.168.0.11), and redirect also the port 65535.
The following is an illustrative example; the screen
of present configuration depends on your router.
Some routers offer the option `Virtual Server', that
is similar but more outpost than the ‘Port
Forwarding'. Soon you will have to install in your
PC (with ‘Connection Wizard') the
virtual serial
port
. The IP address here entered is the external
address of the local area network.
In order to know the external IP you must see the
settings information of your router. Now you can
run VirtualRack end user software so that that it
communicates with your 562dsp/IP via Internet.