manualshive.com logo in svg

Solarflare SFA6902F, User Manual, Page: 81 / 375

Share
Download
Solarflare SFA6902F User Manual Download Page 81

Issue 11

© Solarflare Communications 2014

76

Solarflare Server Adapter

User Guide

Product name: Solarflare SFN7122F SFP+ Adapter

Part number: SFN7122F

Serial number: 712200205071133867100591

MAC address: 00-0F-53-21-9B-B0

Installed keys: OpenOnload, PTP, SolarCapture Pro

Active keys: OpenOnload, PTP, SolarCapture Pro

Blacklisted keys: 0

Invalid keys: 0

License Inventory

Use the combined --inventory and --keys options to identify the licenses installed on an adapter.

sfkey --adapter=eth4 --inventory --keys

eth4, eth5: 712200205071133867100441 (Flareon), $ONL, PTP, SCP, SSFE, !PM,

License information is displayed in 

[Prefix] [Acronym] [Suffix]

 format.

 Prefix:            $      Factory-fitted,

  (may be omitted)  !      Not present.

  Acronym:           LNA    Line Arbitration,

                     ONL    Onload,

                     PCAP   Packet Capture,

                     PM     Performance Monitor,

                     PTP    Precision Time Protocol,

                     RSE    Resilient Ethernet,

                     SCP    SolarCapture Pro,

                     SSFE   SolarSecure Filter Engine,

                     An     Application unknown to this version of sfkey

                            ('n' is a placeholder for the application id).

  Suffix:            <none> Licensed,

                     +      Site licensed,

                     ~      Evaluation license,

                     *      Inactive license,

                     @      Inactive site license,

                     -      No state available.

Summary of Contents for SFA6902F
























































































































































































































































































































































































Reviews:

No comments