manualshive.com logo in svg

Solarflare SFA6902F, User Manual, Page: 123 / 375

Share
Download
Solarflare SFA6902F User Manual Download Page 123

Issue 11

© Solarflare Communications 2014

118

Solarflare Server Adapter

User Guide

Repair, Remove and Change Drivers and Utilities

From the 

Control Panel > Programs > Programs and Features

, select the 

Solarflare Driver Package

 

then select 

Uninstall

, 

Change

 or 

Repair

 from the menu bar above the program list.

Install Solarflare Adapter Manager

Installs Solarflare Adapter Manager (SAM) for easy 
access to adapter configuration options, wizards for 
teaming and VLAN setup, adapter statistics, and 
diagnostic tools. See 

Managing Adapters with SAM 

on page 128

 for more details. 

SAM is installed by default.

Note: If this option is grayed out, you need to exit the 
Solarflare installer and then install Microsoft .NET 
Framework 3.5 before re-running the Solarflare 
installer.

Install Solarflare management tools 
notification area icon

Installs a Solarflare notification area icon for 
launching Solarflare Adapter Manager (SAM) locally 
or for a remote computer.

The icon is not installed by default. 

Table 28:  Solarflare Custom Setup

Option

Description

Summary of Contents for SFA6902F
























































































































































































































































































































































































Reviews:

No comments