manualshive.com logo in svg

Solarflare SFA6902F, User Manual, Page: 80 / 375

Share
Download
Solarflare SFA6902F User Manual Download Page 80

Issue 11

© Solarflare Communications 2014

75

Solarflare Server Adapter

User Guide

3.19 License Install with sfkey

The sfkey utility is distributed with the Linux Utilities RM package. This utility is used to install 
Solarflare AppFlex™ licenses and enable selected on-board services for Solarflare adapters. For more 
information about license requirements see 

Solarflare AppFlex™ Technology Licensing. on page 12

.

sfkey: Command Usage

# sfkey [--adapter=eth<N>] [options]

If the adapter option is not specified, operations will be applied to all installed adapters.

• To view all sfkey options:

# sfkey --help

• To list (by serial number) all adapters that support licensing:

# sfkey --inventory

• To display an adapter serial number and installed license keys:

# sfkey --adapter=eth4 --report

2-port adapter:     eth4, eth5

Product name:       Solarflare SFN7122F SFP+ Server Adapter

Part number:        SFN7122F

Serial number:      712200205071133867100441

MAC addresses:      00-0F-53-21-9B-B0, 00-0F-53-22-8B-B1

Installed keys:     Onload, PTP, SolarCapture Pro, SolarSecure Filter 

Engine, 

Active keys:        

Onload, PTP, SolarCapture Pro, SolarSecure Filter Engine

Blacklisted keys:   0

Invalid keys:       0

Unverifiable keys:  0

Inapplicable keys:  0

• To install a license:

Copy the license key data to a .txt file on the target server. All keys can be in the same key file and 
the file applied on multiple servers. The following example uses a license key file called key.txt 
created on the local server.

# sfkey --adapter=eth<N> --install key.txt

sfkey firmware update utility: v3.3.3.6330

Copyright Solarflare Communications 2006-2013, Level 5 Networks 2002-2005

Reading keys...

Writing keys to eth1...

Adapter: eth1

Summary of Contents for SFA6902F
























































































































































































































































































































































































Reviews:

No comments