manualshive.com logo in svg

Solarflare SFA6902F, User Manual, Page: 17 / 375

Share
Download
Solarflare SFA6902F User Manual Download Page 17

Issue 11

© Solarflare Communications 2014

12

Solarflare Server Adapter

User Guide

1.3 Software Driver Support

• Windows 7.

• Windows 8 and 8.1.

• Windows® Server 2008 R2 release.

• Windows® Server 2012 - including R2 release.

• Microsoft® Hyper-V™ Server 2008 R2.

• Linux® 2.6 and 3.x Kernels (32 bit and 64 bit) for the following distributions: RHEL 5, 6, 7 and 

MRG. SLES 10, 11 and SLERT.

• VMware® ESX™ 5.0 and ESXi™ 5.1, vSphere™  4.0 and vSphere™  4.1.

• Citrix XenServer™  5.6, 6.0 and Direct Guest Access.

• Linux® KVM.

• Solaris™  10 updates 8, 9 and 10 and Solaris™ 11 (GLDv3).

• Mac OS X Snow Leopard 10.6.8 (32 bit and 64 bit), OS X Lion 10.7.0 and later releases, OS X 

Mountain Lion 10.8.0 and later, OS X Mavericks 10.9.

Solarflare SFN5162F and SFN6122F adapters are supported on the IBM POWER architecture (PPC64) 
running RHEL 6.4 on IBM System p servers. 

The Solarflare accelerated network middleware, OpenOnload and EnterpriseOnload, is supported 
on all Linux variants listed above, and is available for all Solarflare Onload network adapters. 
Solarflare are not aware of any issues preventing OpenOnload installation on other Linux variants 
such as Ubuntu, Gentoo, Fedora and Debian variants.

1.4 Solarflare AppFlex™ Technology Licensing.

Solarflare AppFlex technology allows Solarflare server adapters to be selectively configured to 
enable on-board applications. AppFlex licenses are required to enable selected functionality on the 
Solarflare Flareon™ adapters and the AOE ApplicationOnload™ Engine.

Customers can obtain access to AppFlex applications via their Solarflare sales channel by obtaining 
the corresponding AppFlex authorization code. The authorization code allows the customer to 
generate licenses at the MyAppFlex page at 

https://support.solarflare.com/myappflex

. 

The sfkey utility application is used to install the generated license key file on selected adapters. For 
detailed instructions for sfkey and license installation refer to 

License Install with sfkey on page 75

.

Summary of Contents for SFA6902F
























































































































































































































































































































































































Reviews:

No comments