manualshive.com logo in svg

Solarflare SFA6902F, User Manual, Page: 196 / 375

Share
Download
Solarflare SFA6902F User Manual Download Page 196

Issue 11

© Solarflare Communications 2014

191

Solarflare Server Adapter

User Guide

Sfupdate: Examples

• Display firmware versions for all adapters: 

sfupdate

Sample output from a host with a single SFN5122F adapter installed: 

/Write

Writes the updated firmware to the adapter. 

If the 

/Image

 option is not specified, 

/Write

 will write 

the embedded image from sfupdate to the hardware. 

The update will fail if the image on the adapter is current 
or newer; to force an update, specify 

/Force

 in the 

command line. 

/Yes

Update without prompting for a final confirmation. This 
option may be used with the 

/Write

 and 

/Force

 

options, but is not required with the 

/Quiet

 option.

/Image <ImageFileName>

Sources firmware image from an external file. 

/NoWarning

Suppress update warnings.

Solarflare firmware update utility [v4.1.4]

Copyright Solarflare Communications 2006-2014, Level 5 Networks 2002-2005

1: Solarflare SFN7122F SFP+ Server Adapter

   MAC address: 00:0F:53:21:9B:B1

   Firmware:    v4.1.0                  - update to v4.1.4?

     Boot ROM:  v4.1.0.6723             - update to v4.2.0.1000?

     Adapter:   v4.1.0.6732             - update to v4.1.1.1020?

2: Solarflare SFN7122F SFP+ Server Adapter #2

   MAC address: 00:0F:53:21:9B:B0

   Firmware:    v4.1.0                  - update to v4.1.4?

     Boot ROM:  v4.1.0.6723             - update to v4.2.0.1000?

     Adapter:   v4.1.0.6732             - update to v4.1.1.1020?

Table 47: Sfupdate Options

Option

Description

Summary of Contents for SFA6902F
























































































































































































































































































































































































Reviews:

No comments