Issue 11
© Solarflare Communications 2014
134
Solarflare Server Adapter
User Guide
4
Click
OK
to save your options or
Cancel
to retain the existing settings.
Working with Third-Party Adapters
Third-party adapters installed in the server are also listed in the SAM’s Network Adapters list, along
with the Solarflare adapters and any teams and VLANs which have been set up on the server.
SAM provides some options for working with third-party adapters. The available actions for third
party adapters are shown in the
Action
pane.
Table 31: SAM Configuration Options
Tab
Options
Description
Values
Display values using SI units
Displays values using international
standard units (K, M, G, T, P, E), for
example 2.3M. Enabled by default.
This can be useful when dealing
with the large Tx/Rx numbers that
can accumulate with 10Gb
networking.
Note: The Transmit and Receive
bytes columns ignore this setting.
Values
Use separators in large values
Use separators with large numbers,
for example 2,341,768. Enabled by
default.
Values
Load/bandwidth units
Use bits per second (default
setting), or bytes per second when
displaying data transfer figures.
Warnings
Warnings displayed before a major
action takes place
Warnings for the following actions
can be enabled or disabled in SAM:
• Deleting a VLAN or removing a
network adapter from a team
• Deleting a team