Chapter 8: Setting Up Communication to the
Monitoring Portal
Power optimizers send information to the inverter via the DC power lines (the PV output circuit). The
information is sent from the inverter to the SolarEdge monitoring portal through the Internet. In order
to send the data from the inverter, a communication connection must be set up, as described in this
chapter.
CAUTION!
When connecting the communication cables, make sure that the ON/OFF switch at the bottom
of the inverter is turned OFF, and the AC is turned OFF.
When configuring the communication parameters, make sure that the ON/OFF switch is OFF,
and the AC is turned ON.
Chapter 8: Setting Up Communication to the Monitoring Portal
SolarEdge
-
StorEdge
-Single
Battery/High
Capacity
Installation
MAN-01-00283-
1.1
59
