manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 78

- 78 -

10.2 SCREWS

All of the planter's fasteners must be checked and 

re-tightened if necessary.

 AFTER THE MACHINE'S INITIAL 10 HOURS 

OF OPERATION, THE SCREWS SHOULD BE 

TIGHTENED.

If you have to remove wheels to change tyres or for any other 

reason, when re-fitting them on the machine the screws 

should be tightened as per the table below:

TYRES

TIGHTENING TORQUE (Nm)

650/50 R22.5

350 - 380

560/60 R22.5

350 - 380

400/60-15.5 16PR

270 - 290

23x8.50 - 12 6PR

160 - 175

10.3 MACHINE CLEANING

The planter must be cleaned with pressurised air; it must not 

ever be washed with water.

During work, foreign objects may clog up parts of the 

machine. Remove any foreign objects and check for any 

damage.

 EVERY TIME THE SEED HOPPER IS CLEANED 

USING COMPRESSED AIR, USE PROPER 

PERSONAL PROTECTIVE EQUIPMENT (PPE).

 CLEAN THE DISPENSERS WHEN THEY ARE 

NO LONGER BEING USED.

 

IMPORTANT

: FOR PLANTER VERSIONS OF THE 

MACHINE, INSPECT THE 2 SUCTION BELLOWS 

AND KEEP THEM CLEAN. THERE IS ONE 

ON EITHER SIDE OF THE MACHINE (FIG. 10.1). 

A BUILD-UP OF SEED OR DUST RESIDUE CAN 

CLOG UP THE PNEUMATIC SYSTEM.

Fig

Fig. 10.1

. 10.1

LEFT-SIDE SUCTION 

LEFT-SIDE SUCTION 

BELLOW

BELLOW

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands