manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 5

- 5 -

1- INTRODUCTION

It is essential to read and follow the instructions and 

recommendations in this manual before operating 

the seed 

drill or precision planter ARGO

. Careful reading enables 

maximum operator efficiency, prevents accidents and damage, 

and increases the planter’s capacity and life expectancy.

Please ensure that this manual has been read by any person 

involved in performing 

operational tasks,

 (including 

preparation, dealing with mechanical problems and 

supervising the machine), 

maintenance

 (inspection and 

technical assistance) and 

transport

.

For your safety, please follow these technical safety 

instructions as 

SOLÀ

 will not be responsible for damages 

caused by not observing the information provided.

In the first chapters you will find the Technical Characteristics 

and Safety Instructions. Basic concepts that are required 

to operate the machine are explained in the Starting, 

Adjusting and Maintenance sections. 

The last part of this manual consists of Dosage Tables, 

detailed by all types of seed, fertilizer, micro granular 

fertilizer and micro granular pesticide.

MAQUINARIA AGRICOLA SOLÀ 

RESERVES 

THE RIGHT TO CHANGE THE ILLUSTRATIONS, 

TECHNICAL DATA AND TECHNICAL CHARAC-

TERISTICS AT ITS DISCRETION.

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands