manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 17

- 17 -

5.2 ELECTRICAL CONNECTIONS

The machine has electrical connections for:

•  INDICATOR LIGHTS.

•  ISOBUS CONNECTION.

•  HYDRAULIC CONTROL AND WORK LIGHTS.

   IMPORTANT: 

CONNECT ALL OF THE CABLES; 

OTHERWISE THE MACHINE WILL NOT WORK.

5.2.1  INDICATOR LIGHTS

All models have a 7-pin connector for indicator lights.

7-pin connector diagram and table (according to ISO 1724):

1

5

4

7

6

3

2

Pin 

no.

Stan-

dard

FUNCTION

1

L

Left indicator light

2

54G

Fog light

3

31

Earth

4

R

Right indicator light

5

58R

Right position lamp

6

54

Brake

7

58L

Left position lamp

5.2.2   ISOBUS

The machine must have the 9-pin 

connector (according to ISO 11783) 

to allow the machine to connect to the 

tractor's ISOBUS system.

3

8

7

1

2

6

4

5

9

 WHEN TRANSPORTING THE MACHINE ON PUBLIC 

ROADS, MAKE SURE THAT THE WORK LIGHTS 

ARE SWITCHED OFF.

5.2.3  HYDRAULIC CONTROL AND WORK 

LIGHTS

+

-

The machine is powered via the 3-pin 

connector (in accordance with standard 

DIN 9680).

   IMPORTANT: 

IF THIS CABLE IS NOT 

CONNECTED, IT WILL NOT BE POSSIBLE TO 

COMPLETE ANY MOVEMENT WITH THE CHASSIS 

OR MARKERS.

To turn the work or hopper lights on or off, follow these steps:

Fig. 5.5

Fig. 5.5

Fig. 5.6

Fig. 5.6

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands