Sola ARGO Starting Manual Download Page 13

Page: 13 / 84

- 13 -

3.4 IDENTIFICATION OF THE MACHINE

All machines are supplied with a NAMEPLATE on the drawbar,

detailing:

Manufacturer’s name and address.

Model number of the machine.

Machine type.

Serial number.

CE Marking and year of manufacture (to last digits).

Fig. 3.7

22
33
44

3.5 USE ACCORDING TO DESIGN

The

ARGO

planter has been manufactured specifically for

sowing cereals and other grain seeds and spreading fertiliser

(according to model).

The machine has been designed to be trailed by a farm

tractor.

If any other use of the machine results in it being damaged,

the manufacturer accepts no responsibility for this.

You must comply with all legal provisions regarding safety

on the machines, road safety and occupational health

and safety.

Any modifications made by the user will invalidate the manu-

facturer's warranty for any resulting damage that may occur.

Avoid using wet seeds and fertilisers. Using these may clog

or break the components.

MAQUINARIA AGRÍCOLA SOLÀ

RESERVES

THE RIGHT TO CERTIFY ITS MACHINES IN THE

MARKETS THAT IT DEEMS NECESSARY.

DEPENDING ON THE CONDITIONS OF USE

DEFINED BY THE MACHINE'S END USER AND

ANY OPTIONAL EQUIPMENT INCLUDED,

DURING TRANSPORTATION THE MACHINE

MAY NOT COMPLY WITH THE CURRENT

REGULATIONS FOR HIGHWAYS AND PUBLIC

ROADS. COMPLYING WITH THE ROAD TRAFFIC

REGULATIONS IS THE SOLE RESPONSIBILITY

OF THE END USER OF THE MACHINE.

MAQUINARIA AGRÍCOLA SOLÀ WILL NOT

BE LIABLE UNDER ANY CIRCUMSTANCES FOR

THE CONSEQUENCES OF A VIOLATION OF THE

CURRENT ROAD TRAFFIC REGULATIONS IN THE

COUNTRY WHERE ITS MACHINES ARE SENT.

Mod.

Type

Number

MAQUINARIA AGRÍCOLA SOLÀ S.L.

CTRA. DE IGUALADA, S/N

08280 CALAF (BCN)

SPAIN

Summary of Contents for ARGO





















































































Search results

Summary of Contents for ARGO

Reviews:

Brands by name

Popular brands

Sola ARGO, Starting Manual

Search results

Summary of Contents for ARGO

Reviews:

Brands by name

Popular brands