manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 18

- 18 -

Fig. 5.7

Fig. 5.7

Fig. 5.8

Fig. 5.8

Turn on the desired light; work lights (green) and/or hopper 

lights (yellow)

Fig. 5.9

Fig. 5.9

5.3 HYDRAULIC CONNECTIONS

The machine requires hydraulic connections to:

•  FOLD/UNFOLD AND ROTATE THE SOWING WINGS AND 

FOLD/UNFOLD THE MARKERS (according to model).

 

   A double outlet. Maximum 80 l/min.

•  LOWER AND RAISE THE SOWING EQUIPMENT.

   A single outlet.

•  HYDRAULIC BLOW FAN FOR THE PNEUMATIC CONVEYING 

OF THE MAIN HOPPERS (1 & 2); HOPPERS FOR MICRO-

GRANULAR PRODUCTS (according to model); AND POWER 

GENERATION (according to model). 

   A single outlet.

•  HYDRAULIC SUCTION FAN (according to model).

   A single outlet.

•  HYDRAULIC SERVICE BRAKE.

   A single outlet.

•  FREE RETURN FOR ALL SINGLE OUTLETS.

The different hydraulic circuits can be distinguished 

by colours, as shown on the table below:

CAP 

COLOUR

DESCRIPTION

YELLOW

For FOLDING/UNFOLDING the chassis (APP OFF) 
For FOLDING/UNFOLDING markers (APP ON)

GREEN

To RAISE/LOWER the sowing equipment

RED

Blow fan OPERATION

BLUE

Suction fan OPERATION

RED

Hydraulic circuit for the service brake

RED

For the FREE RETURN

VACUUM

VACUUM

H1/H2

H1/H2

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands