manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 44

- 44 -

6.5 EXCLUDING A METERING UNIT

To exclude a metering unit so that it stops planting, follow 

these steps:

1

-  

INDIVIDUAL EXCLUSION OF THE TRANSMISSION 

for 

each element.

2

-  

RAISE UP THE METERING UNIT

.

6.5.1 EXCLUSION OF THE TRANSMISSION

To 

ENGAGE/DISABLE THE TRANSMISSION 

in models with 

ELECTRICAL TRANSMISSION (ISOBUS)

, see the ISOBUS 

manual.

To 

DISABLE THE TRANSMISSION 

in models with 

MECHANICAL TRANSMISSION

, you must:

1-  

Shift the clutch by  pulling it  until the knob gets fixed at  the 
exclusion position (Fig. 6.29).

Fig. 6.29

Fig. 6.29

1

Fig. 6.30

Fig. 6.30

To 

RECONNECT THE TRANSMISSION

:

1-  

Pull the knob out slightly (Fig. 6.30) and the clutch will return 
to its transmission position.

2-  

Check that the screws (Fig. 6.29) have engaged correctly. If not, 
move the clutch until they engage.

THIS OPERATION MUST ONLY BE PERFORMED 

WHEN THE PARKING BRAKE IS SET.

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands