manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 6

- 6 -

2. SAFETY INSTRUCTIONS

2.1 SAFETY SYMBOLS

En este manual encontrará tres tipos de símbolos de seguridad y de peligro:

TO WORK MORE EASILY 

WITH THE PLANTER.

TO PREVENT DAMAGE 

TO THE PLANTER AND 

OPTIONAL EQUIPMENT.

TO PREVENT PHYSICAL 

INJURY.

On the machine you will find the following warning 

pictograms:

Read the instructions carefully and observe the 

safety advice given in the operating manual.

During the coupling maneuver, stay away from 

the rear part of the tractor. Check nobody 

stands in the operational area of the telescopic 

folding parts. 

Risk of serious physical injury.

 

While maintaining or repairing the planter, 

stop the tractor’s engine and prevent it from 

starting. The ignition key must be removed.

Never stand under the sowing equipment 

or swivel area of the machine’s extension tine 

coulters.

Risk of serious physical injury.

Risk of being crushed when working under the 

machine, please secure the machine to prevent 

this risk. 

Risk of serious physical injuries.

It is forbidden to ride on the machine during 

operation. 

Risk of serious physical injuries 

caused by falling.

 Danger of infection from escaping hydraulic 

fluid at high pressure! This can inflict serious 

injuries with potentially fatal consequences 

if it passes through the skin and into the body. 

Keep the hose lines in good condition. Risk 

of serious physical injuries.

 Never stand under the track markers nor inside 

their action area.

 Risk of serious physical injury.

 Coupling point for loading and unloading the 

machine by crane.

Do not exceed maximum load

The parts signaled with this pictogram should 

be kept in good condition and greased.

Kg. Max.

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands