manualshive.com logo in svg

Sola ARGO, Starting Manual

Share
Download
Sola ARGO Starting Manual Download Page 69

- 69 -

8.2.1  CHANGING THE ROLLER

In the event that the distributed product needs to be changed and 

the dosage needs to be changed from high to low or vice versa, 

the sections of the distributor roller will have to be changed, this 

is done in the following way:

1-  

Remove the pin (A, Fig. 8.30).

Fig. 8.30

Fig. 8.30

A

A

2-  

Take the security nuts off from the motor side (B, Fig. 8.31).

B (x2)

B (x2)

Fig. 8.31

Fig. 8.31

3-  

Disconnect the electric motor cable.

4-  

Remove the motor and the roller. To  change the detachable 

rollers, the Seeger ring must be removed. 8.32).

5-  

Assemble the components which correspond to  the product 

to  be  distributed (the images correspond to  a  change from 

a HIGH DOSAGE product to a LOW DOSAGE product).

Fig. 8.32

Fig. 8.32

6-  

Present the roller and motor combination in  the hopper 

to make sure that the ROLLER SEPARATORS line up with the EXIT 

SEPARATORS (Fig. 8.33) 

Fig. 8.33

Fig. 8.33

7-  

One the correct assembly of  the roller separators is  verified, 

tighten the nuts (B, Fig. 8.31) and insert the pin (A, Fig. 8.30).

Summary of Contents for ARGO





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands