novaPDF
91
novaPDF v7 User Manual
Copyright © 2011 Softland
Position
You can select a simple adjustment (only by the margins) or a more complex one which involves
aligning and changing the origin of the watermark.
Fit to margins
If the "Fit to margins" radio button is selected, the watermark will be automatically zoomed so it
will fit in the printing region.
Customize origin
The above behavior (when "Fit to margins" is set) is probably sufficient in most of the cases. But if
you want to have a more accurate control of the result, you can select the "Customize origin"
radio button and manually enter alignment and origin for the watermark.
Origin
You can set here the alignment and origin of the watermark in the PDF. The controls from this
group are active when "Customize origin" is set.
Center horizontally
If you set this option the watermark will be centered horizontally. At the same time the Align to
right option will be disabled and the Left origin is calculated automatically.
Center vertically
If you set this option the watermark will be centered vertically. At the same time the Align to
bottom option will be disabled and the Top origin is calculated automatically.
Align to right
If you set this option the watermark will be aligned to the right margin. At the same time the
Center horizontally option will be disabled and the Left origin is calculated automatically.
Align to bottom
If you set this option the watermark will be aligned to the bottom margin. At the same time the
Center vertically option will be disabled and the Top origin is calculated automatically.
Left origin
The left origin of the document contents. It can be modified by entering a value or pressing the
Up and Down arrows if the Center horizontally and Align to right options are not set.
Top origin
The top origin of the document contents. It can be modified by entering a value or pressing the
Up and Down arrows if the Center vertically and Align to bottom options are not set.
Units
You can change the measurement units from the Units drop down list. The available values are
millimeters, inches and points. Changing the units will recalculate the margins and the origins.
Preview
You can preview changes you do on the Custom Position window without actually saving them.
Reset to default
Set all options to the default values (no margins and Fit to margin option selected).
1.3.9.4 Copy Watermark
This dialog is displayed when copying a text or image watermark and allows naming the new
watermark.
