110
4
Checking
Total outside tolerance
Selection
within or our of
Here you define whether summations in the totalising memory may only be made
for values within the tolerance or also for values outside the tolerance.
Factory setting: out of
Total or picking
Selection
of Totalising or Picking for the following settings.
Totalising
means that the individual items are removed from the scale after they
have been stored in the totalising memory.
Picking
means that the individual items remain on the scale after they have been
stored in the totalising memory and that the next items are placed on the scale.
Factory setting: Totalising
Auto total / picking
Selection
off or on.
On means that only the first position at a time needs to be stored by pressing the
Plus key, all other positions are automatically added after weight has been reached
and stability is stored in the totalising memory.
Factory setting: off
Reset consecutive number
Selection
of the condition under which the consecutive totalling / picking number
is to be reset.
>
Not active
>
Clear total memory
>
On/Off
>
Function key (activates a separate function key)
Factory setting: not active
Total key function
Selection
of which functions are to be linked to the sum key
Display totals only
After pressing the function key Total, the total is displayed. The user can then
decide whether the total memory is to be deleted or not.
Press the F2 key to clear the total memory.
Then confirm the confirmation prompt with the F1 to F3 keys and press YES to
print the total.
Total Display/Print/Clear
After pressing the Total function key, the totals are displayed for 3 seconds.
The memory contents are printed out and deleted at the same time. Then
a new totalling operation can be started.
Factory setting: Display/Print/Clear
Clip off factor
Input
in d via numeric keypad
The number of digits by which the scale must be unloaded during totalisation so
that you can store weights in the totalising memory again. If the weight is not
unloaded, it will not be stored in the totalising memory; error message "Error 55
Place weight on scale.
You can enter values between 0 and 30 digits. If you enter 0, you can total the
weight once the stability has been reached.
Factory setting: 15 digit increments
Summary of Contents for 3025
Page 1: ...www soehnle professional com Operation Manual Terminal 3025 ...
Page 114: ...114 ...
Page 115: ...115 ...
