Soehnle 3025 Operation Manual Download Page 93 | Manualshive

Page: 93 / 116

Soehnle 3025 Operation Manual Download Page 93

93

6.7.11 Display options with the Info key

Pressing the button gives you the following options:

>

F1 Tare fix

Display of stored tare fixed values (Tare-Fix memory).

>

F2 Ref fix

Display of stored reference weights (Ref-Fix memory)

>

F3 Check pieces

Display of the current setpoint with tolerance

>

F4 Total

Display of the current totals in the totalising memory

>

F5 Plus

Displays all items stored in the totalising memory (item list). The individual items can be called up
using the arrow keys (F3/F4).

>

Tare key

Displays the current tare weight in the tare memory.
After pressing the key , press the key .

6.7.12 Transfer of current values to the fixed memory

To store reference weights and target values directly in the fixed memory for piece checking, first determine
the reference weight and add the target value (piece) with tolerances.

Press the F5 key to confirm. The Ref-Fix memory is opened fix in the 3rd function key level. The reference
weight, target weight and tolerances are already stored.
The article description and the article number are added.

«
...
91
92
93
94
95
...
»

Summary of Contents for 3025





















































































































Reviews:

No comments