29
MODULYS Green Power
- Ref.: IOMMODGPXX01-GB 00
ENGLISH
10. COMMUNICATION INTERFACE
SNMP card
10.4.
On board SNMP adapter allows the UPS to be monitored over networks as a peripheral. The adapter sends out traps on UPS alarms
that can be monitored using a Network Management Software or via web browser. It can be used in conjunction with JNC client to
perform an orderly shutdown of critical and virtual servers within the enterprise network.
Specifications:
• SNMP agent and web server implemented in UPS supporting the following protocols: ARP, IP, ICMP, SNMPv1, SNMPv3 USM,
UDP, TCP, HTTP, FTP, TFTP, SMTP, BOOTP, SNTP, DN and Telnet.
• Security login by MD5 .
• User level management.
• Firmware upgrade for new features through TFTP.
• Batch configuration through FTP.
• Save event logs and history values of UPS in EEPROM.
• Scheduled UPS shutdown, restart and test.
• Wake-On-LAN packet to wake up PC.
• Send the e-mail and SNMP trap to notify users.
• Provides JNC software to protect public operating systems.
• Provides the InsightPower EzSetting software to easily configure for the first time and upgrade firmware.
Dip Switch Mode
SW1
SW2
Mode
ON
ON
Configuration
ON
OFF
For Environmental Sensor
OFF
ON
Pass Through
OFF
OFF
Normal
Programmable Relay I/O Card (option)
10.5.
Specifications:
• The status information on UPS is presented as 6 contact closures and programmable output contacts.
• UPS event monitoring in various application practices.
• Configurable UPS shutdown delay time.
• Configurable input signal during UPS shutdown or battery test.
• Provides graceful unattended shutdown to protect up to 6 computers.
Modbus protocol (option)
10.6.
MODBUS protocol over TCP/IP allows to connect the UPS to a network (Ethernet connection).
EMD - Environmental Monitoring Device (option)
10.7.
It is a digital environmental monitoring system for the surveillance of networking cabinet’s temperature, humidity and
secures alarms in the room environment.
Summary of Contents for MODULYS Green Power
Page 33: ......
