14
EN
ATyS p M - 542935E - SOCOMEC
4.
ATYS P M VERSIONS
The ATyS p M is available as a 4P product with integrated 230/400 Vac control voltage taken directly off the power
section.
On option it is available with RS485 communication.(Modbus Slave).
4.1.
Product presentation
This quick-acting source transfer switch incorporates:
1. 2 mechanically interlocked switches including an
electronic control-command module.
2. A quick-acting electric control unit enabling
automatic or manual system operation.
3. Electrical specifications compliant with product
standards, and a version identification.
4. Changeover switch wiring identification.
5. Control connections.
6. An RJ45 connection for a remote interface
D10 / D20.
7. A connector for RS485 communication (Modbus),
for the version with communication.
CAUTION
Ensure that the load is connected to the top of the switch with the
motorisation on the right hand side as shown.
2
3
7
6
4
5
1
4.2.
Specifications and advantages
1 - Power section:
A fully integrated and interlocked transfer switch, with high electrical performance offering microprocessor
control and monitoring.
2 - Operation:
A flexible operating mechanism enabling quick motorised transfer in automatic mode or locally in manual mode
for emergency operations. Features a locking device to ensure (in position zero) a secured isolation of the load
(padlocked).
4.3. Supply types
The power supply of ATyS p M is required to be 230VAC ± 30% at a frequency of 50/60 Hz and has been developed
so as to meet most network configurations.
Product’s working ranges:
Version 230 / 400 VAC
Version 127 / 230 VAC
Umin
Umax
Umin
Umax
Ph-N
160
305
160
305
Ph-Ph
277
528
160
305
