www.soarnex.com
3.
Log into your EWC wireless controller management page.
4.
Click on
Management
and click on
Maintenance
.
5.
In the Firmware Management section, click Browse to choose EWC wireless controller
firmware file.
6.
Navigate to the folder on your computer where the unzipped firmware file (e.g.
EWC-100-62W-Auto-2.03b04
.img
) is located and select it.
7.
Click
. If prompted, click Yes or OK.
Please note the following:
-
Do not upgrade the firmware using a wireless connection and only using a wired network
connection to upgrade the firmware.
-
Do not interrupt the firmware upgrade process (Do not turn off the device or press the
Reset button during the upgrade); any interruptions during the firmware upgrade process
may permanently damage your controller.
Connect the device
7.
Connect the Ethernet RJ-45 UTP cable to the EWC wireless AP controller and to your local
network (e.g. router, gateway, etc.)
8.
Connect the Ethernet RJ-45 UTP cable to
EWA series access points.
Note: The EWA series access points are
standard IEEE 802.3 af / at PoE compliant
power device (PoE PD) and may also be
connect to a PoE/PoE+ switch (PoE PSE) for
data and power, however, for the purposes
of this installation guide we will reference
installation using the PoE Switch. Connect
the EWA series access points directly to the
wireless controller first for initial
configuration.
