![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrt8/iqbrt8_manual_1309063018.webp)
IQBRT8
SECTION 41b
IQBRT8OPS 020403
Version 1 Issue 7
41b.18
◀
Input_Gains
This will display the gain settings of the selected
input and also the sampling rate.
The display will also indicate whether or not the
input has been inverted by inserting a suffix of
INV
or if the input has been muted by inserting
MUTED.
If the input characteristics have not been
changed
PASS
will be shown.
◀
Input_PPMs
This selection will reveal a bargraph display
showing the peak level of the both input subframes
of the selected input.
The scale is divided into 8 equal divisions, each
representing a 4 dB level increment.
The 0 dB point is defined as 4 and maybe set to
between –12 dBFS and –24 dBFS using the
PPM
Scaling
item
in the
Setup
menu.
This metering function follows standard Peak
Programme characteristics.
◀
Input_CS_Data
Selecting this item will display information about
the Source channel status (for the selected
subframe), examples of which are shown below:
◀
◀
◀
◀
Up Down
▶
▶
▶
▶
These buttons should be used to scroll through the
items in the above menu.
Outputs…
▶
▶
▶
▶
This menu allows information about the status of
the output and will be displayed in the information
LCD window.
Selections available are:
◀
Output_Status
The first line shows which input (Source) is routed
to which selected output (Destination).
The second line provides data about the Source
signal and its’ sample rate.
The third line gives data about the Locking signal
as selected via the
◀
◀
◀
◀
Lock
function.
This may be either:
Video
Reference
Input 1
AES
Reference
Internal