![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrt8/iqbrt8_manual_1309063023.webp)
IQBRT8
SECTION 41b
IQBRT8OPS 020403
Version 1 Issue 7
41b.23
◀
◀
◀
◀
Logging
If a logging device is attached to the RollCall™
network, information about various parameters will
be reported to the logging device assigned in the
Remote Control Interface system. (See Section 1,
The RCIF Menu System)
The logging sub-menu allows the following
information to be made available for logging:
◀
Input_1 to 8_Change
These report any changes of the sample rate and
presence of inputs 1 to 8.
◀
AES_Reference
This reports any changes of the sample rate and
presence of the AES reference signal.
◀
Video_Ref_Change
This reports any changes of the sample rate and
presence of the Video reference signal.
Factory preset is nothing enabled
◀
◀
◀
◀
Preset_Unit
Selecting this item sets all adjustment functions
that include a preset facility, to their preset values.
Note that this is a momentary action and the text
will not become reversed.
◀
◀
◀
◀
Software_Version
Selecting this item reveals a display showing the
version of the software fitted in the module.
Select OK to return to the System Menu
◀
◀
◀
◀
Serial_Number
Selecting this item reveals a display showing the
serial number of the module.
Select OK to return to the System Menu.
◀
◀
◀
◀
Build_Number
Selecting this item reveals a display showing the
factory build number of the module.
Select OK to return to the System Menu.
◀
◀
◀
◀
Restart
This function allows the unit to reboot and all
power-up settings to be enabled.
This is an easier method than switching the mains
power on and off.