![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrt8/iqbrt8_manual_1309063020.webp)
IQBRT8
SECTION 41b
IQBRT8OPS 020403
Version 1 Issue 7
41b.20
Setup…
▶
▶
▶
▶
This selection reveals a sub-menu that allows
various functions to be set.
◀
◀
◀
◀
Lock
This selection reveals a sub-menu that allows the
option to reframe the input(s) to different reference
signals.
If no locking inputs are detected then the unit will
revert to the internal mode (free-running at 48 kHz)
The locking information will be displayed when the
Inputs display is selected.
Selections available are:
◀
Video
Unit will lock to the video input Reference signal
◀
AES_Reference
Unit will lock to the AES Reference.
Note that when locking to the AES reference the
pull in range is ±2 Hz, if the reference is 48 KHz
but out of this range (PLL unable to maintain lock)
the information display will indicate "
ERR
" instead
of "
OK
" and
Fsi
will indicate the reference input
sampling rate to the nearest 1 kHz.
◀
Input_1
Unit will lock to the signal at Input 1
◀
Internal
The unit will free-run at a sample rate of 48 kHz.