![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrt8/iqbrt8_manual_1309063017.webp)
IQBRT8
SECTION 41b
IQBRT8OPS 020403
Version 1 Issue 7
41b.17
◀
Name_Assoc…
This selection allows the naming of the input
sources and the output destinations.
To name an association, select either
◀
◀
◀
◀
Source…
or
◀
◀
◀
◀
Dest…
to reveal the appropriate
sub-menu.
Select the Source/Destination to be renamed from
the list.
e.g.
◀
Source_1
This will reveal the renaming screen.
To compile/edit the text the right
▶
and left
◀
buttons adjacent to the upper text line in the menu
should be used to select the character position in
the text and the spinwheel used to select the
character.
The
◀
Clear
function blanks out the selected
character.
The
◀
Preset
function loads the default text, for
example, Memory_1.
O.K.
▶
saves the text and returns to the main
menu.
Note that the new name will replace the old name
in all relevant menus.
Display…
▶
▶
▶
▶
This menu allows information about the
input/output signals and channel status to be
displayed in the information LCD window.
◀
◀
◀
◀
Prev
Next
▶
▶
▶
▶
The previous and next functions allow the previous
Input/Output or the next Input/Output to be
selected for viewing in the information display.
◀
◀
◀
◀
Subframe 1
Subframe 2
▶
▶
▶
▶
These functions allow information about the two
subframes to be selected and viewed in the
display. (Channel Status only)
◀
◀
◀
◀
Inputs…
This item may be used to select the inputs for
interrogation. Data will be shown in the Information
LCD.
The following data may be displayed about the
currently selected item (selected via the Display
menu above). The
◀
◀
◀
◀
Prev
and
Next
▶
▶
▶
▶
functions
should be used to select and display other items.
◀
Input_Status
This will display information about the input and the
reference source.
Fsi indicates the sample rate.
The line standard of the video reference is shown
and may be 625 or 525 or LOST.
Note that if the source or a reference signal has
been lost OK will be replaced by
**