![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbrt8/iqbrt8_manual_1309063024.webp)
IQBRT8
SECTION 41b
IQBRT8OPS 020403
Version 1 Issue 7
41b.24
RollCall Control Templates for the IQBRT8
Note that templates for the IQBRT6 are the same
the IQBRT8 except for the number of inputs and
outputs.
The first item in the menu is
Crosspoint Select
The Routing Matrix
This function allows the input/output routing to be
set up by checking the boxes for the source and
destination channels.
Silence
may also be chosen as a source for a
destination.
Protect
If a Protect box is checked that particular
source/destination route will be locked and cannot
be disturbed by other controls.
Mon (Monitor)
This function allows an input source (before any
processing) to be selected and monitored by an
AES monitoring device connected to the
monitoring output on the rear panel.
Enable Take
When selected this function will allow the
Take
function to be operated.
When not selected any changes made to the
routing assignments will occur immediately.
Selecting this function will enable the changes
made to the router assignments.
Selecting this function will cancel any changes
made to the router assignments if the
Enable Take
function has been selected.
Name Association
Source and Destination Names
This selection allows the naming of the input
sources and the output destinations.
To change a name type the new name in the text
area and select
(return)
Preset
returns to the default names.
Routing
Matrix
Cancel
Take